3M Pneumatic Angle Grinder 28405
Trying to repair or maintain your 28405 3M Angle Grinder? R.S. Hughes can help. Select the numbered part in the schematic then click on the numbered row to go right to the part you need.
| Item | Part # | Description |
|---|---|---|
| 1 | 06589 | Wheel Arbor 2 |
| 2 | 55088 | Retaining Ring |
| 3 | 55112 | Output Spindle 5/8-11 Thread |
| 4 | 55078 | Ball Bearing |
| 5 | 55113 | Gear Set |
| 6 | 55114 | Ball Bearing .500" x .25" |
| 7 | 55076 | Socket Head Hex Screw,1/4-20 |
| 8 | 55083 | Hex Nut, 1/4-20 |
| 9 | 55108 | 4-1/2" Type 27 Guard |
| 10 | 55111 | Angle Head |
| 11 | 06523 | Grease Fitting |
| 12 | 06503 | Jam Nut |
| 13 | 28402 | Side Handle 3/8-16 EXT Thread |
| 14 | 06653 | Angle Head Clamp Nut |
| 15 | 06655 | Lock Ring |
| 16 | 06520 | Pin, 1/8" x 1/4" |
| 17 | 06609 | O-Ring 1 |
| 18 | 06510 | Ball Bearing 3/8" x 7/8" |
| 19 | 06639 | Front End Plate |
| 20 | 06562 | Rotor |
| 21 | 06643 | Vane, Set of 5 |
| 22 | 06563 | Cylinder |
| 23 | 06560 | Rear End Plate |
| 24 | 06527 | Wave Washer .440" x .618" |
| Item | Part # | Description |
|---|---|---|
| 25 | 06508 | Ball Bearing |
| 26 | 06567 | Washer .251" x .468" x .63" |
| 27 | 06568 | Screw #8-32 x 3/8 But Hd Cap |
| 28 | 06638 | Housing |
| 29 | 06642 | Lever |
| 30 | 06558 | Torr Pin, 3/16" x 7/8" |
| 31 | 06543 | O-Ring |
| 32 | 06511 | O-Ring |
| 33 | 06556 | Regulator |
| 34 | 06501 | Screw, 6-32 x 3/4 Set Soc Hex |
| 35 | 06559 | Groove Pin 1/8" x 7/8" Type E |
| 36 | 06598 | Housing Cover |
| 37 | 6566 | Warning Label |
| 38 | 06552 | Throttle Valve Seat |
| 39 | 06557 | Muffler |
| 40 | 06553 | Throttle Valve |
| 41 | 06554 | Taper Spring |
| 42 | 55084 | Exhaust Deflector |
| 43 | 06555 | Screen |
| 44 | 06608 | O-Ring 1/16" x 5/8" x 3/4" |
| 45 | 55107 | Bushing 3/8" NPT |
| 46 | 55115 | Spanner Wrench |
| 47 | 06524 | 5/8" Wrench |
| 48 | 55106 | 4.5" Guard (flat back) OPT |
