GorillaPro CA120SI Surface Insensitive Instant Adhesive Clear Liquid 20 g Bottle - GorillaPro 10007810
GORILLA PRO 10007810
This quick-setting adhesive is the best choice for dry or acidic applications that require faster cure speeds. CA120SI displays excellent strength on a variety of substrates, such as metal, rubber, plastic, wood, paper, and leather. Bottles packaged 1 each, 10 bottles per case.
GorillaPro CA120SI Surface Insensitive Instant Adhesive Technical Specifications
- Brand:GorillaPro
- Series:CA120SI
- Material Compatibility:Metal; Rubber; Plastic; Wood; Paper; Leather
- Cure Time:24 hr
- Fixture Time:10 sec
- Product Form:Liquid
- Package Type:Bottle
- Package Size:20 g
- Tensile Strength:1800 psi
- Maximum Operating Temperature:+203 °F
- Minimum Operating Temperature:-67 °F
- Viscosity Measurement:120 cPs
- Color:Clear
- Viscosity Class:Low/Med Viscosity
- Storage Condition:Stored in a cool, dry, dark area without exposure to direct light or heat. Store in a well-ventilated place. Keep container tightly closed.
- Package Quantity:1 each, 10 per case
- Standards Met:Mil-A-46050C, Type II Class 2, CID A-A-3097, Type II Class 2
Usage & Removal of GorillaPro CA120SI Surface Insensitive Instant Adhesive
Directions: Surfaces should be clean, dry, and free of grease. Apply enough to leave a thin layer after compression. Press and hold firmly for a few seconds. Handling strength is achieved in less than a minute. Wait 24 hours for a full-strength cure.
Removal: This product is intended for permanent application.
Safety Information for GorillaPro CA120SI Surface Insensitive Instant Adhesive
Storage: Container should be stored in a cool, dry area out of direct sunlight. Do not refrigerate.
Safety: Wear protective gloves and eyewear. In case of skin contact, wash with plenty of soap and water. Keep away from open flame and hot surfaces.
Disposal: Dispose of contents in an approved waste facility.
